Error Number 5200 on Canon Pixma MP237

How to Overcome Error Number : 5200 on Canon Pixma MP237 and IP2770 printer

Make sure the printer is turned off , and the position of the power cable plugged in electric outlet .

1) Then the Resume button pressed ( still do not hold off ) , then the Power button is pressed until the green light lights .
2) Released reset button , while the power button is still on hold
3) In the state the power button is still on hold ,
4) press the resume button 5 times ( the LED lights will light up alternately , orange , green , etc.)
5) After pressing the resume button 5 times , Release the two buttons simultaneously . LED lights will flash or blink for a moment and then will turn green .
6) Furthermore, the computer will detect a new printer , you just ignore it and wait until the process is complete the detection of a new printer .
Once they have finished detecting..use Reset Printer Software ( Service Tools )

Read more

Reset Canon Pixma IP2770 | Absorber Full | Error Code 5B00

Reset Canon Pixma IP2770 | Absorber Full | Error Code 5B00

 

 

STEP 1:  Entering Service Mode

You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.

2. Hold down Resume button and press Power button.

3. Keep holding down Power button and let Resume button go.

4. Then Press Resume button 5 times then let BOTH buttons go.

5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

STEPS 2: Using the Resetter

1. After you download the resetter, extract it and double click "servicetool.exe"

2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK

5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

 

Resetter Here

Read more

Resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648.

latest resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648.

The following are the steps that must be done:

1. Turn on the printer to service mode. how to enter service mode is :

• While the printer is OFF, press and hold the Start/Stop button (Resume/Cancel in some other models).
• While holding the Start/Stop button, press and hold the POWER button.
• When the POWER LED (green light) lit, release the Start/Stop button (still holding the POWER button).
• Press the Start/Stop button TWICE (still holding the POWER button)
• Release the POWER button.
• Wait for the LCD to display 0 (zero).

1. After the display is 0, attach the printer usb cable to pc, then there will be detected new device (it's normal)
2. Run service_tool 1050.exe
3. Confirm detected usb-port numbers on usb port column.
4. Click the MAIN ink counter reset button, make sure there is paper in the paper feed, because the printer will print after the process is complete.
5. Click platern ink counter reset button, the printer will print again.
6. Turn off the printer.
7. Your printer is ready for use again.

HERE IS THE DOWNLOAD

Read more