Pages

Tuesday 27 March 2012

Resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648.

,
latest resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648.

The following are the steps that must be done:

  1. Turn on the printer to service mode. how to enter service mode is :
  • While the printer is OFF, press and hold the Start/Stop button (Resume/Cancel in some other models).
  • While holding the Start/Stop button, press and hold the POWER button.
  • When the POWER LED (green light) lit, release the Start/Stop button (still holding the POWER button).
  • Press the Start/Stop button TWICE (still holding the POWER button)
  • Release the POWER button.
  • Wait for the LCD to display 0 (zero).
  1. After the display is 0, attach the printer usb cable to pc, then there will be detected new device (it's normal)
  2. Run service_tool 1050.exe
  3. Confirm detected usb-port numbers on usb port column.
  4. Click the MAIN ink counter reset button, make sure there is paper in the paper feed, because the printer will print after the process is complete.
  5. Click platern ink counter reset button, the printer will print again.
  6. Turn off the printer.
  7. Your printer is ready for use again.
HERE IS THE DOWNLOAD

Read more

canon mx338 error 5b00

,
The waste ink absorber is full and is triggering error 5B00

How to Reset Canon MX338 with Resetter:
Entering Service mode Canon MX338:
1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Permanent Reset Canon MX338:
1. After you download the resetter, extract it and double click “MX338.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.



Read more

Tuesday 13 March 2012

print app for ipad that will work with kodak esp 5250 printer

,



Wireless access to your pictures is now at your fingertips with Pic Flick!
Relive and share your favorite iPhone and iPod Touch pictures on a Kodak EasyShare wireless digital frame and Kodak ESP 5200,7200,9200,C300 Series and ESP Office 6100 and 2100 Series All-in-One printers. With a few simple touches you can send pictures to your digital frame or printer.
Kodak EasyShare W820 and W1020 wireless digital frames are like windows to the world. Featuring built-in WiFi, these frames give you seamless access to your memories – whether they are stored on your home computer or online, and now, your iPhone and iPod Touch.
Also with built-in WiFi, the Kodak All-in-One printer makes it easy and affordable to wirelessly print your photos from your iPhone or iPod. So go ahead shoot, print and share; it’s that easy.
Kodak is making it even easier to connect with your friends and family through pictures.
Supporting languages: English, Dutch, French, German, Italian, Spanish, Portuguese, Danish, Norwegian, Swedish, Finnish

Read more

How to Reset Error Code E08 in Canon MP287 - Absorber Full

,



When the MP287 is turned on, it will immediately appear on the LCD panel error E08 MP287. And when we do print command, then the monitor screen will show “The Ink Absorber is Almost Full”. Caption MP287 E08 error on the screen as follows:

  1. Turn on the Canon MP287, MP287 LCD then the panel will pop up error E08, and there is a description of “The Ink Absorber is Almost Full” on the screen of your monitor.
  2. Download Resetter MP287 at this link http://www.mediafire.com/?esuhhe214i1dd6t
  3. Canon MP287 printer must be in a state of SERVICE MODE. Do I read the next step.
  4. Canon MP287 Turn off the E08 error by pressing the power. Do not unplug the power cord.
  5. Press and Hold the button STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
  6. Release the button STOP / RESET but do not release the button POWER.
  7. In these circumstances the POWER button is still depressed, press the STOP / RESET 6 times.
  8. Then release both buttons simultaneously. Then the Canon MP287 will be in Service Mode condition.
  9. LCD Panel MP287 will blank / dark and in your computer will detect new hardware. Ignore it.
  10. The next step Exctract and Run Service Tool for MP287 MP287 E08 error you downloaded earlier.
  11. Click the “PLAY”, then the printer will proceed, then MP258 will print one page with the words “D = 000.0″
  12. Click “Clear EEPROM”.
  13. Then click “EEPROM”, and the printer will print the results MP258 Resetter. Writing one line as follows: “TPage (COPY TTL = 00 000 = 00 000)”.
  14. Canon MP287 Turn off by pressing the power.
  15. Canon MP287 printer that error E08 will be normal again.
Read more

How to Reset Waste Ink Counter Canon Pixma iX5000 and iX4000 - Absorber Full

,


To reset Absorber Full for Canon PIXMA iX4000 or iX5000 you have to enter to service mode. Follow the step to enter to service mode on Canon PIXMA iX4000 or iX5000 :
  1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .
  2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
  3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
  4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
  5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
  6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.
Note :
  • Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.
Read more

How to reset waste ink Canon Pixma MP145 - Absorber Full

,

Solution:

  • Connect the printer to a Power source.
  • Turn off the printe.
  • With the Printer power off, press the "Power" button while press and hold Stop/Reset button.
  • When the Power led is light, press "Stop/Reset" button two times while pressing and holding the "Power" button.
  • When releasing the "Power" button and the "Stop/Reset" button, the printer will move into a service mode
  • When the on/off lights in green, press the "Stop/Reset" button four times to reset wase ink counter.
  • Unplug cable power from a power source.
Read more

Service Printer Canon i90 - Waste Ink Tank Full

,

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.
Read more
 

How to Service my Printer Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger