Tuesday, 19 June 2012

Locate and Repair Common Printer Problems Using HP Diagnostic Tools

Can Download Here

HP Print and Scan Doctor was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced when connected to Windows-based computers. 

Simply run the tool and follow the on-screen instructions

System requirements:       
Windows XP(32bit only) with Service Pack2 and above
Windows Vista (32 and 64 bit)
Windows 7 (32 and 64 bit)
You must have administrative privileges for your PC
Read more

Epson LQ-580 Driver for Windows XP


Epson LQ-580 Driver for Windows XP Can Download Here  
Version: 1.1c
Operating system(s):     Windows 95, Windows 98, Windows XP 32-bit, Windows 2000, Windows ME, Windows NT 4.0, Windows NT 3.51, Windows 3.X
Language(s): English, Nederlands
Product(s): Epson LQ-580
Release date: 01 January 2004
File format: EXE
File size:  5.67 MBs

Read more

Tuesday, 12 June 2012

How to fix error B200 on Canon Printers


1. Try to Replace Print head and logic board (Replace them at the same time.)
2. Try to Replace Power supply unit Check and Clean Head contact pin condition of the carriage unit
3. Try Check Cable connection especially the carriage FFC

* It maybe the contacts on the print head are damaged and you have to replace the print head to resolve the issue, but before that you can follow the steps above to remove the print head and then cleaning the copper contacts on them with a cotton swab dampened in distilled water until they are clean, after drying them reseat the print head and check the issue.

hope it help you

Read more

Thursday, 7 June 2012

Canon Pixma printer error - Carriage error or Error Code 5100

Canon Pixma printer error - Carriage error or Error Code 5100

Problems and Solutions:
Smearing or scratches on the carriage slit filmclean the timing slit film.Foreign material or paper debris that obstructs the carriage movement;
remove foreign material.Ink tank conditions;
Re-seat the ink tanks.
Read more

Brother MFC Printer display "unable to clean" or Error 46


First turn of the printer
Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
Press 80
Press the “mono start” button several times until you see “purge: xxxx”
Press “2783” in order to reset the purge counter. You will see: “purge:0000”
Press the "stop" button.
Press “99” to exit the maintenance mode.
Read more

How to Service my Printer Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger