Pages

Tuesday 27 March 2012

canon mx338 error 5b00

,
The waste ink absorber is full and is triggering error 5B00

How to Reset Canon MX338 with Resetter:
Entering Service mode Canon MX338:
1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Permanent Reset Canon MX338:
1. After you download the resetter, extract it and double click “MX338.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.



0 comments to “canon mx338 error 5b00”

Post a Comment

 

How to Service my Printer Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger