Error Number 5200 on Canon Pixma MP237

How to Overcome Error Number : 5200 on Canon Pixma MP237 and IP2770 printer

Make sure the printer is turned off , and the position of the power cable plugged in electric outlet .

1) Then the Resume button pressed ( still do not hold off ) , then the Power button is pressed until the green light lights .
2) Released reset button , while the power button is still on hold
3) In the state the power button is still on hold ,
4) press the resume button 5 times ( the LED lights will light up alternately , orange , green , etc.)
5) After pressing the resume button 5 times , Release the two buttons simultaneously . LED lights will flash or blink for a moment and then will turn green .
6) Furthermore, the computer will detect a new printer , you just ignore it and wait until the process is complete the detection of a new printer .
Once they have finished detecting..use Reset Printer Software ( Service Tools )

Read more

How To Service My Printer - MISS / CISS single printer installation guides

 
Step by step instructions

1. Open the front cover
2. open the ink cartridge locking cover, put the cartridge, close the cartridge locking cover
3. Stick the tube using double side tape, use cable tie to tie up the tube, and cut the extra cable tie
4. Stick the tube on the printer
5. Do cleaning process to make sure perfect print

How To Service My Printer - MISS / CISS single printer installation guides

Read more

Reset Canon Pixma IP2770 | Absorber Full | Error Code 5B00

Reset Canon Pixma IP2770 | Absorber Full | Error Code 5B00

 

 

STEP 1:  Entering Service Mode

You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.

2. Hold down Resume button and press Power button.

3. Keep holding down Power button and let Resume button go.

4. Then Press Resume button 5 times then let BOTH buttons go.

5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

STEPS 2: Using the Resetter

1. After you download the resetter, extract it and double click "servicetool.exe"

2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK

5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

 

Resetter Here

Read more