Resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648.

latest resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648.

The following are the steps that must be done:

1. Turn on the printer to service mode. how to enter service mode is :

• While the printer is OFF, press and hold the Start/Stop button (Resume/Cancel in some other models).
• While holding the Start/Stop button, press and hold the POWER button.
• When the POWER LED (green light) lit, release the Start/Stop button (still holding the POWER button).
• Press the Start/Stop button TWICE (still holding the POWER button)
• Release the POWER button.
• Wait for the LCD to display 0 (zero).

1. After the display is 0, attach the printer usb cable to pc, then there will be detected new device (it's normal)
2. Run service_tool 1050.exe
3. Confirm detected usb-port numbers on usb port column.
4. Click the MAIN ink counter reset button, make sure there is paper in the paper feed, because the printer will print after the process is complete.
5. Click platern ink counter reset button, the printer will print again.
6. Turn off the printer.
7. Your printer is ready for use again.

HERE IS THE DOWNLOAD

Read more

canon mx338 error 5b00

The waste ink absorber is full and is triggering error 5B00

 

How to Reset Canon MX338 with Resetter:

Entering Service mode Canon MX338:

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Permanent Reset Canon MX338:

1. After you download the resetter, extract it and double click “MX338.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.

Free Download Resetter Canon MX338

Read more

print app for ipad that will work with kodak esp 5250 printer

 

Wireless access to your pictures is now at your fingertips with Pic Flick!
Relive and share your favorite iPhone and iPod Touch pictures on a Kodak EasyShare wireless digital frame and Kodak ESP 5200,7200,9200,C300 Series and ESP Office 6100 and 2100 Series All-in-One printers. With a few simple touches you can send pictures to your digital frame or printer.
Kodak EasyShare W820 and W1020 wireless digital frames are like windows to the world. Featuring built-in WiFi, these frames give you seamless access to your memories – whether they are stored on your home computer or online, and now, your iPhone and iPod Touch.
Also with built-in WiFi, the Kodak All-in-One printer makes it easy and affordable to wirelessly print your photos from your iPhone or iPod. So go ahead shoot, print and share; it’s that easy.
Kodak is making it even easier to connect with your friends and family through pictures.
Supporting languages: English, Dutch, French, German, Italian, Spanish, Portuguese, Danish, Norwegian, Swedish, Finnish

Download Here

Read more

How to Reset Error Code E08 in Canon MP287 - Absorber Full

When the MP287 is turned on, it will immediately appear on the LCD panel error E08 MP287. And when we do print command, then the monitor screen will show “The Ink Absorber is Almost Full”. Caption MP287 E08 error on the screen as follows:

1. Turn on the Canon MP287, MP287 LCD then the panel will pop up error E08, and there is a description of “The Ink Absorber is Almost Full” on the screen of your monitor.
2. Download Resetter MP287 at this link http://www.mediafire.com/?esuhhe214i1dd6t
3. Canon MP287 printer must be in a state of SERVICE MODE. Do I read the next step.
4. Canon MP287 Turn off the E08 error by pressing the power. Do not unplug the power cord.
5. Press and Hold the button STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
   
6. Release the button STOP / RESET but do not release the button POWER.
7. In these circumstances the POWER button is still depressed, press the STOP / RESET 6 times.
8. Then release both buttons simultaneously. Then the Canon MP287 will be in Service Mode condition.
9. LCD Panel MP287 will blank / dark and in your computer will detect new hardware. Ignore it.
10. The next step Exctract and Run Service Tool for MP287 MP287 E08 error you downloaded earlier.
11. Click the “PLAY”, then the printer will proceed, then MP258 will print one page with the words “D = 000.0″
12. Click “Clear EEPROM”.
13. Then click “EEPROM”, and the printer will print the results MP258 Resetter. Writing one line as follows: “TPage (COPY TTL = 00 000 = 00 000)”.
14. Canon MP287 Turn off by pressing the power.
15. Canon MP287 printer that error E08 will be normal again.

Read more